VirtuFit TR-500i Bedienungsanleitung Seite 15

ENGLISH
Loss of power: Check that the sensor cable is correctly connected.
Security key does not work: check that the security key is correctly
attached.
CONSOLE (FIG. A)
INCLINE
6 8 10
INCLINE/CALORIES: The display shows the number of
calories burned. This is an indication that may differ
from the actual number. The counter counts from
0 to 999, when you reach 999, it starts again at 0. When
you count down, the counter goes to 0 and when the
counter reaches 0, the treadmill slowly goes into sleep
mode. When incline is selected, the treadmill displays
0-15%. If not, the treadmill will display a calorie screen
after 30 seconds.
TIME: Indicates the duration of the run.
KM: Indicates distance in kilometres.
SPEED/HEART RATE: The display shows your current
speed from 0.8 to 20.0 km/h. When you hold the heart
rate sensor, the current heart rate is displayed 50-200/
min (data cannot be used for medical purposes and is
indicative).
Displays the incline height/position.
INCLINE: Press these buttons to adjust the angle of the
incline. You must do this while using the treadmill. If
you press the button for more than 0.5 seconds, the
incline will continue to increase or decrease.
Press the MODE button again to select 15:00, 1.00, 50.0
and 5 strokes: this is the calorie countdown mode, 0:00
is the manual mode.
PLAY/PAUSE: to stop or start music or video.
SPEED
6 8 10
MP3
Press this button to select one of the three
entertainment modes: standby mode, audio mode and
video mode. When playing a video, press this button to
watch it in full screen.
When you attach the safety key to your clothing and
have connected the power, you can press this button
to start the treadmill.
Safety key.
Stop the workout.
MP3: You can connect your mobile phone or tablet
MP3
with an AUX cable to listen to music.
Press and hold the button to lower the volume when
listening to music or watching a video.
Press and hold the button to increase the volume
when listening to music or watching a video.
Press the PROG button and the treadmill will display
the following: P1-P2.........P24--U1--U3--HP1--HP2--FAT
in order (P1-P24 are preset programs, U1-U3 are user
based programs, HP1-HP2 is a heart rate control
program, and FAT is a body fat test function).
SPEED 6,8,10: Indicates speed.
Speed control button. When the treadmill is in use,
you can press this button to adjust the speed. It adds
or subtracts 0.1 KM each time you press either button.
If you press the button for more than 0.5 seconds, the
speed will continuously decrease or increase.
Features
Slope.
Hold the heart rate sensor for a few seconds and your
heart rate will be displayed between 50 and 200/min
(the data cannot be used for medical purposes and is
indicative).
Time.
Distance.
15