Changing Batteries - Uniks R18 Bedienungsanleitung

5-8.Auto Power Off
•To conserve battery life, the tester will automatically
turn off after approximately 5 minutes of inactivity.
•When powering down, the tester will beep twice and
the mode indication LED will turn off.
5-9.Flashlight
• Momentarily press the Flashlight button to turn the
flashlight on or off.
• To conserve battery life, the flashlight will automatically
turn off after approximately 5 minutes when the NCV
function is off.
• The tester will beep twice as the flashlight auto power
off

6. Changing Batteries

1. .Carefully unscrew battery cap at the rear(flashlight
end)of the tester.
2.Replace batteries with two AAA 1.5V batteries. Observe
polarity.
3.Carefully align cover with tester as shown below.
4.Screw cover onto tester until it feels tight. Do not use
excessive force.
5.Verify operation by using the tester on a known live AC
voltage within the defined detection range of the tester.
12