Uniks R18 Bedienungsanleitung Seite 10

4. Description Detector
6
7
1. Battery cover
2. Flashlight
3. Flashlight button
4.Phases Cyclic Sense button
5. 0n / 0ff button
6. LED indicators
7.Punta Detector
8.Worklight
5. Operations
5-1.Turning the Tester On
Press the tester ON/OFF Button, the tester will beep once
and the green LED and worklighit will illuminate to indicate
that the tester is working on high voltage mode and ready
for use.
5-2.Turning the Tester Off
Press the ON/OFF Button one more time, the tester will
beep twice and range LED will turn off.
5-3.Mode Select Function
• When the tester is on with NCV function, short press the
once, the green and yellow LED flash slowly alternately
to indicate that the tester is working on phase sequence
test mode.
• Short press
green LED illuminate, the tester returns to high voltage
mode.
• The tester will beep once every
• The Button operation is valid only when the NCV
function is turned on
Button again, the yellow led off and the
10
Button operation.