Safety Instructions - GORMAN-RUPP FILL-RITE FR1600 Serie Installations- Und Bedienungsanleitung

|

Safety Instructions

DANGER
•
•
•
WARNING
•
•
•
•
•
•
•
•
•
To ensure safe operation safe and efficient operation, it is essential to read and follow each of these warnings and precautions.
WARNING
•
•
CAUTION
•
•
•
Figure 1 – Model FR1612
fillrite.com
FR1600 SERIES DIESEL FUEL TRANSFER PUMPS
Electrical shock hazard!
Improper use or installation of this product can cause serious bodily injury or death!
Electrical wiring should be done by a licensed electrician in compliance with the local, state, and national electrical code, ANSI/NFPA 70,
30, 30A as appropriate.
NOT FOR USE WITH GASOLINE OR ALCOHOL!
Not for use in hazardous locations.
Improper use or installation of this product can cause serious bodily injury or death!
Do NOT smoke near pump or use pump near open flame.
Do not use this product for fluid transfer into aircraft.
This product is not suited for use with fluids for human consumption or fluids containing water.
Do not dispense fluid that is thicker than diesel fuel. Motor may overheat!
Disconnect power connections PRIOR to replacing fuse!
Noise emission during bypass mode generates up to 81 dB(A) within one meter distance of the pump.
Disconnect power to pump before servicing.
The pump power cable is equipped with an electrical fuse. If the fuse burns out switch the pump off, disconnect from power, and look for
the cause of the failure. Once the cause of failure has been remedied, replace with a 30 amp fuse.
A diesel compatible filter should be used on pump outlet to ensure that no foreign material is transferred to the fuel tank.
Tank or barrel should be anchored to prevent tipping in both the full and empty conditions.
The pump should never be left unattended while running. Once the nozzle lever is closed, the pump should be shut off immediately.
Figure 2 – Model FR1614
INSTALLATION AND OPERATION MANUAL
Figure 3 – Model FR1616
3