Switch Off Display Until Next Update - HomeMatic HM-OU-LED16 Installations- Und Bedienungsanleitung

If receipt was unsuccessful, the LED illuminates for
approx. 1 sec. in red.
- After acknowledgement, the device reverts to normal
mode (status display).
Please note!
If no other button is pressed for 5 sec. during
channel selection (LED flashes rapidly in oran-
ge), channel selection is terminated and the
device reverts to normal mode (status display).

8.3 Switch off display until next update

The display LED's can be switched off automatically
after a certain time (adjustable) to reduce power con-
sumption (eco mode) as described in the following un-
der 1. or manually, as described in the following under
2.
A display time of 255 seconds is preset in the as-deli-
vered condition.
1. The status display can be configured by the central
control unit in such a way that it automatically deac-
tivates the display after an adjustable „on" time. The
„on" time can be set to a period of 1 to 255 seconds,
or to „always on".
After each update the display remains on for the se-
37