Start Up; Method Of Operation; Teaching-In At The Central Control Unit - HomeMatic HM-OU-LED16 Installations- Und Bedienungsanleitung

- Place the label field in the existing recess between
the rows of LED's and replace the front cover. It is
held in place automatically by magnets.
- Close the cable compartment by replacing the
housing cover. The cable must be led through the
central opening in the housing cover.
7

Start up

7.1 Method of operation

The Homematic status display has 16 actuator chan-
nels and 16 transmit channels.
Each of the 16 actuator channels is represented by
two LED's, meaning that each channel can have a
status of off, green, red, or orange (mixture of green
and red).
The „Up" and „Down" buttons on the rear of the device
are used to switch between the 16 transmitter chan-
nels. The 16 LEDs indicate which channel is currently
selected. Press the „Send" button to send the signal.

7.2 Teaching-in at the central control unit

Please read this entire section before starting
the teach-in procedure!
33