Function - HomeMatic HM-OU-LED16 Installations- Und Bedienungsanleitung

than 15 W. Normally, both requirements are fulfilled by
normal commercial plug-in power supplies with appro-
priate power.
The device may only be operated indoors and
must be protected from the effects of damp and
dust, as well as solar and other thermal radiati-
on.
3

Function

The Homematic status indicator is used to display the
states of devices in your Homematic system. You can
therefore see at a glance whether a device is on or off.
The status of system variables can also be shown on
the status display via appropriate programs running
on the Homematic central control unit. It can indicate
whether the internal and external alarm zones are ac-
tivated or deactivated, for example, or identify the trig-
gering device in the event of the alarm being activated
(e.g. motion detectors or window contacts).
For this function the device has 16 output channels
(actuator channels) that can be actuated by the Home-
matic central control unit. Four statuses can be shown
on each channel using the display status and different
27