Suntec Wellness KLIMATRONIC DryFix 16 select APP Bedienungsanleitung Seite 10

Manual dehumidification :
Please press the mode button (8) to switch on the dehumidification mode. The corresponding mode
•
indication lights up. In this mode, you can set the desired level of dehumidification and the fan speed.
Please use the digital slider (11) to set the dehumidification from 30% - 80%.
•
Please use the speed button (3) to select between low and high fan speed.
•
Automatic dehumidification:
• Please press the mode button (8) to switch on the automatic dehumidification mode. The corresponding
mode indication (10) lights up.
• The fan speed and humidity level cannot be set in this mode, the unit dehumidifies automatically and with
low fan speed
Laundry drying function:
Please press mode button (8) to switch on the laundry drying function. The corresponding mode indication
•
(15) lights up.
The ventilation speed and humidity level are set automatically and cannot be set manually, the appliance
•
dehumidifies automatically and with high wind speed.
This function helps you to dry clothes, shoes or rugs faster.
•
Fan mode:
Please press the " mode" button (8) to switch on the ventilation mode. The corresponding mode indication
•
(9) lights up.
In this mode, only the fan is working, dehumidification function is not available.
•
For low fan speed, press the fan speed button once, the low fan speed indication (1) and the fan mode
•
indication (9) light up.
For a high fan speed, press the fan speed key again. The high fan speed indicatoion (2) and the fan mode
•
indication (9) light up.
Timer:
• Please press the timer button (13) to set the timer from 0 to 24 hours.
• When the unit is switched on, press the timer button to set the shut-off time as described above.
• When the unit is switched off, press the timer key to set the switch-on time as described before.
Sleep mode:
Please press the sleep mode button (14) to switch on the sleep mode. All indication lights (except WIFI and
•
sleep mode) and the display are switched off. The "Water tank full" light will light up in case the water tank
should be emptied.
Colour light indication:
If the humidity of the ambient air is below 50%, the indicator light lights up in blue.
•
If the humidity is between 50% and 70%, the indicator light is green.
•
If the humidity is above 70%, the indicator light is red.
•
WIFI (Suntec Wellness APP download: pic. 3)
• When connecting the device, the WLAN indicator (16) will start blinking. Please follow the step-by-step
instructions in the app to connect your device to the Wi-Fi and set up the control.
• The Wi-Fi indicator will be continuously lighted when the app and device are connected.
Resetting the WIFI in case of connection errors and for new connections
• If you want to connect the device to a new WLAN or if there are problems when trying to connect the divice
to the app, it is necessary to reset the WLAN. Press and hold the Mode button (8) for 5-10 seconds. The
WLAN indicator will blink 2 times per second and is ready to be connected to the app again.
Please follow the step-by-step instructions in the app to connect your device to the Wi-Fi and set up the
•
control.
The Wi-Fi indicator will light up continuously when the app and device are connected.
•