Electrical Connections - Cobra 1046 Einbauanleitung

Art. 1046 is used to remote control doors whose unlocking and locking movements
are indicated by direction indicators. The product can be universally installed
and can also be used to wind up electric windows without the addition of any
other module if the vehicle in question was already originally equipped with the
comfort function.

ELECTRICAL CONNECTIONS

ELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS
• Connect the RED wire to a +30 positive source (possibly on the load side of
an original fuse in the car).
• Connect the BLACK wire to an original ground connection or to the chassis of
the car.
• Connect the GREEN-RED wire to a +15 positive source.
• Connect the YELLOW wires to the car wires that power the turn indicators.
• Connect the BROWN-WHITE wire to a supplementary negative control module
to wind up the windows.
ATTENTION: the BROWN-WHITE wire can be directly connected to the
window-winding control wire of the car in vehicles equipped with comfort
window winding systems of the negative type. An inverter relay must be
installed if a positive command is required.
• Connect the remaining ORANGE, VIOLET, YELLOW-BLACK, GREY-BLACK,
ORANGE-WHITE and VIOLET-WHITE wires as shown in the "central lock"
diagram.
APPLYING APPROVAL LABELS APPLYING APPROVAL LABELS APPLYING APPROVAL LABELS
APPLYING APPROVAL LABELS APPLYING APPROVAL LABELS
The radio controls are supplied with approval labels
valid for Germany and Great Britain.
The remaining approval numbers are given on the
supplied stickers. Affix the one bearing the code of
your country as indicated in the figure.
GB
9