Installing The External Sounder - Abus FU9090 Anleitung

Installing the external sounder

1) Remove the screws on both sides of the external wireless sounder and open the cover
of the sounder upwards.
2) Using the base plate as a drilling template, mark the drill holes on the wall. Drill the
holes and insert the wall plugs.
3) Fix the sounder to the wall
4) Insert batteries supplied.
5) The external sounder is now ready to be trained for the ABUS wireless alarm system.
6) After the sounder is trained, close the lid and lock it with the screws on the side.
Two Indication
LEDs
Reset Switch
Radio Batteries
Speaker
(3V, Parallel
Connection)
Speaker & Strobe
Batteries
Strobe
(6V, Serial
LEDS
Connection)
External Sounder - PCB Diagram
15