Adjusting The Tilt - Rollei VH-6 Anleitung

Video Head Use
6

Adjusting the tilt

Loosen the main locking knob to the left,
the platform can now be adjusted between
-75°and 90°. Turn the main locking knob to the
right to lock it in the desired position.
Base locking knob
Turn the base locking knob to the left to release
it, the ball head can now be rotated by 360°.
Platform locking knob and safety pin
Loosen the platform locking knob to adjust the
position of the plate.
To remove the interchangeable plate, loosen
the locking knob and then press and hold the
safety knob to pull the plate out backwards.
Handle lock knob
To adjust the angle of the handle, loosen the
locking knob and set the handle to its desired
position and lock it again with the knob.
Adjusting the length of the handle
Loosen the handle lock knob, adjust the handle
length to the desired length and reattach the
handle.
ENGLISH
loosen tighten
loosen tighten
360° horizontal rotation
loosen
5
loosen
tighten
loosen
tighten
tighten