Blackmagic Design HyperDeck Extreme Control Installations- Und Bedienungsanleitung Seite 83

HyperDeck Ethernet Protocol
You can connect to your HyperDeck disk recorder using the HyperDeck Ethernet Protocol
and a command line program on your computer, such as Terminal on a Mac and PuTTY on
a Windows computer. Access can be enabled with or without a username and password,
or disabled entirely. You can use an SSL program to encrypt your session when using a
utility program such as netcat. For more information on the available commands, refer to the
'developer information' section in this manual.
Allow Utility Administration
Blackmagic HyperDeck Setup can be accessed when your disk recorder is connected via the
network or via USB. To prevent users having access via the network, select USB only.
Secure Login Settings
If you have selected 'enable with security' for the web media manager or HyperDeck Ethernet
Protocol access you will need to enter a username and password. The password field will
appear empty once a password is entered.
Secure Certificate Settings
To enable access via HTTPS or the HyperDeck Ethernet Protocol you will require a secure
certificate. This digital certificate acts as an identification card for your HyperDeck Extreme so
that any incoming connections can confirm they are connecting to the correct unit. Along with
confirming the identity of the unit, using a secure certificate ensures data transmitted between
HyperDeck Extreme and a computer or server will be encrypted. When using the secure login
settings the connection will not only be encrypted but require authentication for access.
By default your HyperDeck Extreme recorder will use a self signed certificate. This certificate
may be secure enough for some user workflows, for instance only accessing the HyperDeck
Extreme via a local network. The certificate details will autofill the 'domain', 'issuer' and 'valid
until' fields in the HyperDeck Setup utility.
Following a factory reset the self signed certificate will be regenerated, but you can also
replace it at any time with a new self signed certificate by clicking on the 'remove' button and
following the prompts.
Blackmagic HyperDeck Setup 83