Charging A Battery - DeWalt XR DCB1104 Bersetzt Von Den Originalanweisungen

DO nOt use under wet conditions or in the presence of flammable liquids or gases.
These battery chargers and battery packs are professional power tools.

Charging a Battery

nOtE: To ensure maximum performance and life of lithium‑ion battery packs, charge the
battery pack fully before first use.
1. Plug the charger into an appropriate outlet before inserting battery pack.
2. Insert the battery pack
in the charger. The red (charging) light will blink repeatedly indicating that the charging
process has started.
3. The Stage 1 Charging blink indicator represents the charge process that charges the
majority of the battery's capacity. Stage 2 Charging blink indicator represents the
remainder, or top off charge process, for the battery to reach full capacity.
4. The completion of charge for Stage 1 or Stage 2 will be indicated by the Stage's light
remaining ON continuously. The battery pack is fully charged when both Stage 1 and
Stage 2 charging lights remain ON continuously, and it may be removed and used at
this time or left in the charger.
nOtE: To remove the battery pack, some chargers require the battery pack release button
to be pressed.
Indicators
Stage 1 Charging
Stage 2 Charging
Fully Charged
Hot/Cold Pack Delay*
* The red light will continue to blink, but a yellow indicator light will be illuminated during
this operation. Once the battery pack has reached an appropriate temperature, the yellow
light will turn off and the charger will resume the charging procedure.
The compatible charger(s) will not charge a faulty battery pack. The charger will indicate
faulty battery by refusing to light.
nOtE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be tested at an
authorised service centre.
1 into the charger, making sure the battery pack is fully seated
EnglIsh
27