Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hold the power tool firmly with both hands, with the
u
handles of the power tool grasped with your thumb
and finger. Move your body and arms into a position
from which you can withstand the kickback forces. If
suitable measures are taken, the operator can control the
kickback forces. Never let go of the power tool.
Avoid adopting an abnormal posture and do not saw
u
above shoulder height. This prevents the tip of the guide
rail accidentally coming into contact with an object and
gives you better control of the power tool if unexpected
situations occur.
Always use replacement rails, saw chains and
u
sprocket wheels specified by the manufacturer. Using
incorrect replacement rails, saw chains and sprocket
wheels may cause the chain to break or lead to kickbacks.
Always follow the manufacturer's instructions for
u
maintaining the saw chain. Setting depth gauges too
low increases the likelihood of kickbacks.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Explanation of symbols
Read instruction manual.
Do not expose to rain.
Before starting adjustment and maintenance
work or if the power cable is damaged or
severed, immediately unplug the mains plug.
WARNING: Keep bystanders away.
Always hold the power tool with both hands.
Pay attention to kickbacks from the power tool
and avoid contact with the tip of the chain bar.
Wear eye and head protection.
Bosch Power Tools
Wear hearing protection.
Wear a dust mask.
Wear slip-resistant footwear.
Wear hand protection.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is exclusively intended for sawing autoclaved
aerated concrete.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Rear handle
(2)
On/off switch
(3)
Front handle
(4)
Handguard/lever for activating the front brake
(5)
Serial number
(6)
Nose sprocket
(7)
Chain guard
(8)
TCT saw chain
(9)
Chain bar
(10) Stop
(11) Lock-on button
(12) Cover
(13) Tension wheel
(14) Lock-off function for on/off switch
(15) Extraction outlet
(16) Running direction and cutting direction symbol
(17) Sprocket wheel
(18) Fastening bolt
(19) Guide bar for chain bar
English | 19
1 609 92A 6BF | (25.10.2022)
Werbung
Inhaltsverzeichnis
