Leuze AMS 107i 40 Bedienungsanleitung Seite 14

EN
Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
The AMS is an absolute measuring optical laser measurement system which al-
lows distance measurement of up to 120 m against a reflector.
Areas of application
The AMS is designed for the following areas of application:
– Positioning of automated, moving plant components
– Travel and lifting axes of stacker cranes
– Repositioning units
– Gantry crane bridges and their trolleys
– Elevators
– Electroplating plants
CAUTION
Observe intended use!
The protection of personnel and the device cannot be guaranteed if the
device is operated in a manner not complying with its intended use.
Ä
Only operate the device in accordance with its intended use.
Ä
Leuze electronic GmbH + Co. KG is not liable for damages caused
by improper use.
Ä
Download the device operating instructions: www.leuze.com
Ä
Read this supplement and the operating instructions for the device
before commissioning the device. Knowledge of these documents
is required in order to use the equipment for its intended purpose.
NOTICE
Comply with conditions and regulations!
Ä
Observe the locally applicable legal regulations and the rules of
the employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
In particular, use of the device is not permitted in the following cases:
– in rooms with explosive atmospheres
– as stand-alone safety component in accordance with the machinery directive
1)
– for medical purposes
1)
Use as safety-related component within the safety function is possible, if the
component combination is designed correspondingly by the machine manufac-
turer.
14