Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Note: To display your most recent diagnostic measurement, briefly press the scale with your foot, press the
button
repeatedly until your scale user is displayed, and wait 3 seconds. Then press the
4
to display the most recent diagnostic measurement. To display further measurements, press the
again. Up to 30 measurements can be shown on the display
Note: If the measurement is carried out with shoes or socks on, then only the weight is displayed (when the
scale user is recognised, the weight and BMI are displayed and saved).
4.4 ALTERNATIVE METHOD: creating scale users without the app
Alternatively, you can also create a scale user directly on the scale without using the app. This process is
not required if the scale has already been connected to the app.
1. Press and hold the SET button
2. Press the SET button
3. Use the
button
tion with the SET button
4. "170" flashes on the display. Use the
5. "30" flashes on the display. Use the
6.
flashes on the display. Use the
7. "Act3" flashes on the display. Use the
exercise (considered over the long term). (Act1 = none, Act2 = low, Act3 = medium, Act4 = high, Act5 = very
high/athletic). Confirm with the SET button
8. "End" appears in the display. Confirm with the SET button
9. "0.0" and the user symbol appear on the display. Take the initial measurement.
4.5 Deleting scale users
You can delete individual scale users in the "beurer HealthManager Pro" app.
Alternatively, you can also delete scale users directly on the scale. To do so, proceed as follows:
1. Press and hold the SET button
2. Press the SET button
3. Use the
button
4. Press the SET button
5. "dEL" appears on the display. Confirm with the SET button
4.6 Changing the weight unit
You can change the weight unit either using the "beurer HealthManager Pro" app or directly on the scale:
1. Press and hold the SET button
2. Use the
button
lb = pounds, stlb = stones
3. To confirm, press the SET button
4.7 Deactivating Bluetooth
To deactivate Bluetooth
1. Press and hold the SET button
2. Press the SET button
3. Select "oFF" with the
4. To confirm, press the SET button
Note: Please note that the Bluetooth
To reactivate it, set it from "oFF" to "on".
for 4 seconds. "unit" appears on the display.
3
repeatedly until "on" appears on the display 1.
3
to select the scale user you need (you can select from U: 1 to 8). Confirm your selec-
4
.
3
/
/
/
for 4 seconds. "unit" flashes on the display.
3
twice until "USEr" flashes on the display.
3
to select the scale user to be deleted. Confirm your selection with the SET button
4
repeatedly until "End" appears. Then press the
3
for 4 seconds. "unit" appears on the display
3
or
button
to select the desired weight unit (kg, lb or stlb). kg = kilograms,
2
4
repeatedly until the display
3
and WIFI
®
and WIFI, proceed as follows:
®
for 4 seconds.
3
repeatedly until "on" appears on the display 1.
3
button
or the
2
repeatedly until the display
3
and WIFI function is then NO longer possible.
®
.
1
button
to set the height. Confirm with the SET button
2
4
button
to set the age. Confirm with the SET button
2
4
button
to set the gender. Confirm with the SET button
2
4
/
button
to set your activity level based on how much you
2
4
.
3
. The scale user has been created successfully.
3
. The scale user has now been deleted.
3
button
.
4
17
button
within 5 seconds.
4
.
1
switches off.
1
switches off.
1
button
2
button
2
.
3
.
3
.
3
.
3
Werbung
Inhaltsverzeichnis
