Omnitronic KEY-2816 Bedienungsanleitung Seite 39

8.1.2 Launching Clips
Pressing pads will launch clips in the corresponding location in your Session View. Pads will pulse white to
indicate that a clip is playing. Pressing the pad again will relaunch the clip, and pressing an empty pad will
stop playback on that track.
How fast clips stop or relaunch is set by Ableton Live's Global Quantisation chooser, located at the top of the
Live screen. By default, this is set to 1 bar, but can go as fast as 1/32 notes, or as slow as 8 bars. It can also
be set to 'None' so clips react immediately.
8.1.3 Launching Scenes
Pressing the Scene Launch button (>) launches scenes in Ableton Live. This means that all of the clips in a
row can start together.
8.1.4 Stop ， Solo ， Mute
While in Session mode, it is possible to switch the functionality of the bottom 4 pads so that they no longer
launch clips. This is done with the STOP, SOLO, MUTE button.
The Stop, Solo, Mute button toggles between four different states which affect tracks in the following ways:
Stop (purple): In this state, pressing pads will stop any clip on the corresponding track. The purple pads will
be in blue if tracks are not.
Solo (green): In this state, pressing the pads will solo the corresponding tracks, meaning only tracks with
Solo on will be heard.
Mute (pink): In this state, pressing pads will mute the corresponding tracks.
Clips (white): the fourth press (after toggling through Stop, Solo and Mute) changes the function of bottom
pads back to the default.
39 • EN