Changing The Liquid Or Transportation - Medion ERAZER Bedienungsanleitung

Make sure you always switch off the cooling kit before removing the
quick connector from the notebook. Removing the quick connector
when the cooling kit is still running will cause more leakage due to the
high water pressure, leaving more liquid to clean up.
CAUTION!
Risk of injury!
If you use the notebook with the hoses connected but
with the cooling kit switched off, the quick connector
will heat up.
 Shut down the notebook and leave it to cool down before
removing the connection.
. Changing the liquid or transportation
 Connect the fast-drainage tool to the back of the notebook to drain out any
excess water from the notebook.
 Connect the fast-drainage tool to the cooling kit to drain out any excess water
from the device.
If the water hose is connected to either the notebook or the cooling kit,
you can also connect the fast-drainage tool to both ends of the water
hose to drain away all excess water, but you must ensure that the both
the notebook and the cooling kit are switched off.
DE
FR
NL
ES
IT
EN
153