Av Inputs; Connecting An External Source To The All-In-One Pc; Connecting An Av Source; Changing The Av Source - Medion 98320 Bedienungsanleitung

AV inputs

Connecting an external source to the All-In-One PC

You will also have the possibility of using the All-In-One PC as an output device
through the back HDMI and VGA outputs. Connect a fixed disk external DVD recorder,
an HD multi-media player, a PC and/or another All-In-One PC. Proceed as follows to do
this:

Connecting an AV source


With an HDMI cable
Connect an HDMI cable (not in the scope of supply) to the HDMI-IN of the
the All-In-One PC and the HDMI output of the respective external device,
provided that your AV device has an HDMI output.
No additional cble to transmit sound will be necessary, because this will take
place through the HDMI cable.

With a VGA cable
Connect a VGA cable (monitor cable; not supplied) to the VGA-IN of the All-In-
One PC and the graphics card output of the PC or All-In-One PC.
Connect an audio cable to the audio output of the All-In-One PC and the audio
output of the PC/laptop, if you also wish to transmit sound.

Changing the AV source

1. Switch to the AV mode after you have made all the connections. Press the
MODE operating button to do this.
2. Press the MODE operating button several times to switch between the sources.
The sources will be displayed in the following sequence:
HDMI IN  VGA IN  All-In-One PC  HDMI IN, etc.

AV inputs

51