Bestway Skimatic FLOWCLEAR Gebrauchsanweisung Seite 4

SAFETY TECHNICAL INSTRUCTIONS
• Do not bury cord. Locate cord to minimize abuse from lawn mowers,
hedge trimmers, and other equipment.
• Cleaning and user maintenance must be performed by an adult above
18 years old who is familiar with the risk of electric shock.
• This pump is for use with storable pools only. Do not use with
permanently-installed pools. A storable pool is constructed so that it
is capable of being readily disassembled for storage and reassembled
to its original integrity. A permanently-installed pool is constructed
in or on the ground or in a building such that it cannot be readily
disassembled for storage.
• Using the pump with an unmatched electrical supply is dangerous
and will result in catastrophic failure of the pump.
• Before removing, cleaning, serving or making any adjustments to
the product, always unplug this product from the electrical outlet.
• Do not modify the plug in any way or use plug adaptors to connect
unit to electric supply.
• Handle the pump with care. Do not pull or carry the pump by the power
cord. Never pull a plug from the outlet by yanking the power cord.
Keep cord free from abrasions. Sharp objects, oil, moving parts, and
heat should never be exposed to the filter pump.
• Please examine equipment before use. Notify Bestway at the customer
service address listed on this manual for any damaged or missing
parts at the time of purchase. Verify that the equipment components
represent the filter pump model that you had intended to purchase.
• Pay attention to position of pool and pump so adequate ventilation,
drainage, and access for cleaning is available. Never place pump in
an area that may accumulate water, or in an area where foot traffic
will flow around the pool.
• Atmospheric conditions may affect the performance and life span of
your filter pump. Unnecessary wear and tear may occur during periods
of cold, heat and exposure to sun. Whenever possible, shelter the pump
from these conditions. It is important to ensure the factory equipped
stopper plugs for the inlet and outlet ports replace the screens before
removal or maintenance on the pump is attempted.
4