Cleaning Device Monthly - Jägermeister 1BTMII-EU Bedienungsanleitung

Wipe the housing with a damp cloth and a little washing-up liquid if
necessary.
Dry the housing and all parts with a soft cloth.
Attach the drip tray and the air filter to the device (see p. 37).

Cleaning device monthly

Damage may occur to the device by residual water
freezing inside it.
Turn the main switch to position "0".
Remove the mains plug from the socket.
Clean the device and its parts first (see p. 42).
Open the tap and empty the device.
Close the tap.
Fill the device with warm water through the bottle well.
Rinse the device with the water.
To drain the water, tilt the device forward until it is completely empty.
Insert the bottles (see p. 40).
Tap at least 10 cl of Jägermeister to remove any residual water in the
pipes.
CAUTION!
Make sure that there is no residual water left in the
cooling tank or in the pipes.
English instructions for use
43