Storing And Transporting The Device; Setting Up And Installing The Device - Jägermeister 1BTMII-EU Bedienungsanleitung

Storing and transporting the device

Store the device and its components in a dry, dust-free place.
Transport the device upright in its original packaging.

Setting up and installing the device

Electric shock may occur due to a humid environment.
Fire may occur due to overheated components.
Place the device on a sufficiently stable surface. Make sure that there
is a gap of at least 8 cm from the back wall and at least 3 cm at the
sides.
WARNING
Do not set up the device outdoors or in humid
rooms.
WARNING
When setting up the device, observe the minimum
distances specified in this manual.
Protect the device from naked flames or hot
surfaces.
Protect the device from direct sunlight.
Set up the device ensuring that the mains plug is
accessible.
English instructions for use
37