Device Start-Up - Jägermeister 1BTMII-EU Bedienungsanleitung

Device start-up

Make sure that the tap (1) is
properly and firmly mounted.
Slide the drip tray (2)
between the guide rails (3,
covered) under the device so
that the drip tray rests against
the device.
Make sure that the air filter is
correctly inserted at the back
of the device.
After moving the device, leave it upright for 24 hours before
switching it on again. If you have moved the device, wait 30
minutes before switching it on.
Device start-up
Clean the device thoroughly before using for the first time (see p. 42).
Connect the device to the power supply (see p. 39).
Insert the bottle in the bottle well (see p. 40).
Switch on the device (see p. 41).
38