Connecting And Disconnecting The Mains Cable; Mounting And Removing Bottle Stoppers - Jägermeister 1BTMII-EU Bedienungsanleitung

Connecting and disconnecting the mains cable

Plug the mains cable included
in the scope of delivery into
the connection socket (1) of
the device.
Make sure that the main
switch (2) is in position "0".
Insert the mains plug into a
properly installed socket.
To remove, pull the mains
cable by the mains plug.

Mounting and removing bottle stoppers

Clean the bottle stopper first before using it for the first time or reusing
it (see p. 42).
Make sure the seal (1) is
properly seated in the thread.
Remove the cap from the
bottle.
Place the bottle stopper (2)
on the bottle (3). Turn the
bottle stopper clockwise with
moderate force.
To remove the bottle stopper
(2) from the bottle, turn it anti-
clockwise until it comes off.
English instructions for use
39