Error Description - kqueo K-LIFT X2 Montageanleitung

9. Troubleshooting
Here are some errors that may be displayed on the screen. Errors will only be dis-
played when a key is pressed.
Error

Error description

code
The lifting speed of the two lift-
E01
ing columns does not allow lift-
ing to the same height.
Lifting column 1 of the desk is
E04
overloaded.
The lifting column 2 of the desk
E08
is overloaded.
Lifting column 1 has bumped
E10
and bounced.
Lifting column 2 has bumped
E20
and bounced.
HOT
MOTOR OVERHEATING
Resolution
Check that all cables are properly
connected: power cable and control
box cables.
Make sure that the loading capacity
of the desk does not exceed 113 kg,
then reset the desk.
Make sure that the loading capacity
of the desk does not exceed 113 kg,
then reset the desk.
The desk will automatically stop and
bounce 2 cm. Use the reset proce-
dure described above.
The desk will automatically stop and
bounce 2 cm. Use the reset proce-
dure described above.
Allow the system to cool for 18
minutes. For emergency use, try re-
connecting the desk to the power
supply to reboot the system.
Note:
it may need to be reset or restarted.
21
If your desk is not working properly,