kqueo K-LIFT X2 Montageanleitung Seite 31

STEP 2: ASSEMBLY OF THE LIFTING COLUMNS
NECESSARY TOOLS
2.1 Legen Sie die Hubsäulen waagerecht auf den Boden.
columns ( N) at the ends of the crossbar (O).
2.2 Align the side holes of the crossbar (O) with the holes of the lifting column
(N),
2.3 Insert the screws (A) into the side holes. Tighten them with the 4mm
spanner to secure the lifting column to the crossbar.
9
Insert the lifting