kqueo K-LIFT X2 Montageanleitung Seite 32

STEP N°3: ASSEMBLING THE BASE
NECESSARY TOOLS
3.1 Place the bases (L) on the bottom of the lifting column (N) at the bottom of
the crossbar (O), aligning the fixing holes.
3.2 Attach the base (L) using the 4 screws (B) and the 4mm Allen wrench.
.
3.3 Repeat this procedure to attach the other base
3.4 Attach the 4 adjustable skids (I) to the bases(L).
10