kqueo K-LIFT X2 Montageanleitung Seite 41

4. Memorization of a position
This function allows you to adjust the tray to one of the 4 memorized posi-
tions.
If you turn on the control box for the first time, all memorized positions are set
to the lowest tray height.
To switch to a memorized position, follow the steps below:
a. Press the "UP" or "DOWN" button to set the tray to the desired height, this
height will be displayed on the screen.
b. Press and hold the "M" button for 3 seconds until the digits on the display
start flashing.
c. Press the memory location button 1 to memorize the tray position.
d. "P 1" will appear on the display, indicating the number of the position you
have memorized.
The other positions can be memorized in the same way.
The desk can be adjusted by holding down the "UP" or "DOWN" button until
the desired height is reached.
To program up to four presets: use the "UP" / "DOWN" buttons to find the de-
sired height, then press "M" followed by a number from 1 to 4.
PRECAUTIONS :
Once a preset button has been pressed, the desk will move to the pro-
grammed height.
5. Anti-collision system
The sensitivity of the anti-collision system is designed to work in case of im-
pact with a hard obstacle (table, mobile pedestal...) and is not designed to
work in case of a soft obstacle (hand, chair...)
19