ripcurl Funktion. 3 Zeiger Analog Digital mit Dualzeit, Datum, Wecker, Stoppuhr, Licht und Schlummermodus Bedienungsanleitung Seite 2

English
Function. 3 Hand Analogue Digital with Dual Time, Date, Alarm, Stopwatch,
Light & Sleep Mode
Display
LIGHT/RESET
MODE
To Set Analogue Time
1. Pull crown out fully to point B.
2. Turn crown to move hands to the correct time.
3. Push crown back in fully to point A.
To Set Digital Time/Day/Date/Month
1. In Normal Time mode, push MODE three times to
enter the time setting screen.
2. The Seconds will be flashing. Push START/STOP
to reset the seconds to zero.
3. Push LIGHT/RESET to advance to Hour. Once
flashing, push START/STOP to adjust the Hour.
Tip: you can select 12HR or 24HR format. Use the
START/STOP button to set the hour to "A" for am,
"P" for pm, or "H" for 24HR.
4. Repeat to advance through and set Minutes,
Month, Date, and Day.
Tip: due to this watch having no year setting func-
tion, the calendar will never expire. On March 1st of
a Leap Year, you will need to correct the day.
5. Push MODE to finish the setting.
To Set Daily Alarm
1. In Normal Time mode, push MODE twice to enter
the daily alarm mode.
2. Push LIGHT/RESET to set the Hour. Once flashing,
push START/STOP to adjust the Hour.
Tip: if you are using 12HR format, a "P" will appear
for hours in pm
3. Push LIGHT/RESET to advance to Minutes. Once
flashing, push START/STOP to adjust the Minutes.
4. Push START/STOP to turn on or o the hourly
Chime ( ) and Alarm (
Push LIGHT/RESET to finish the setting.
6. Push MODE to exit the daily alarm mode.
MIN.
HR.
SEC.
).
A
Functions
Sleep Function
In Normal Time mode, push SLEEP to toggle the
digital display screen o or on.
Light Function
In any mode, push LIGHT/RESET to light up the
digital display screen for 3 seconds, before turning
o automatically.
Chronograph & Lap Function
1. In Normal Time mode, push MODE once to enter
the Chronograph mode.
2. Push START/STOP to start the Chronograph.
3. Push LIGHT/RESET to stop the Chronograph's first
lap.
4. Push LIGHT/RESET again to restart the Chrono-
graph. It will continue the count and now will display
the full time elapsed.
5. Push START/STOP to stop the Chronograph.
6. Push LIGHT/RESET to reset the Chronograph to
zero.
START/STOP
B
CROWN
SLEEP
DIGITAL