ripcurl Funktion. 5 Zeiger Tag und Datum Kal. VD76A Bedienungsanleitung Seite 2

English
Function. 5 Hand Day & Date
Cal. VD76A
Display
MIN.
HR.
DAY
SEC.
To Set Day
1. Pull crown out fully to point C.
2. Turn crown to move hands. Advance hour hand 24
hours until the correct day is set. If setting after 12pm,
ensure to advance a further 12 hours.
3. Push crown back in fully to point A.
To Set Time
1. Pull crown out fully to point C.
2. Turn crown to move hands to the correct time.
3. Push crown back in fully to point A.
To Set Date
1. Pull crown out to point B.
2. Turn crown counter-clockwise to current date.
- Do not set the date between 9:00pm and 1:00am.
3. Push crown back in fully to point A.
Tip: If the date or day change occurs at 12pm, instead
of 12am, the am/pm is incorrectly set. Advance the
hour hand by 12 hours.
A B C
CROWN
DATE