Set Eye-Fi Card Connection Mode - Kodak PIXPRO AZ401 Bedienungsanleitung

Set Eye-Fi Card Connection Mode

This camera supports wireless connection
for Eye-Fi cards. Enable the Eye-Fi
connection by following the steps below:
1. Press the
arrow buttons to select
the button to enter the menu.
2. Press the up/down arrow button to
select and press the
right arrow button to enter the menu.
3. Press the up/down arrow buttons to
select [Eye-Fi] and press the
or right arrow button to enter the menu.
4. Press the up/down arrow buttons to
select [On] or [Off] and press the
button to confirm.
86
button, press the up/down
and press
button or
button
Eye-Fi
If the Eye-Fi card is not available
in the camera, this feature is not
displayed.
O
On