Continuous Shot - Kodak PIXPRO AZ401 Bedienungsanleitung

Continuous Shot

Follow the steps below to configure the
Continuous Shot settings:
1. Press the
Shot menu.
Single
2. Press the left/right arrow buttons to
select the following 4 modes:
• Single
• Continuous Shot
44
to enter the Continuous
• 3 Shots
• Time-Lapse
Take pictures based on the
preset interval (30sec/ 1min/
5min/ 10min).
3. Press the button to confirm the
settings and exit the menu.
4. Press the shutter button to start
shooting.
The flash is disabled in this mode in
order to achieve quick succession
of shots.