Scene Mode - Kodak PIXPRO AZ401 Bedienungsanleitung

In Panorama Mode, the Flash, Self-
Timer, Macro Modes and Exposure
Compensation are not available.
Focus Adjustment is also not available
at this time.
In the process of shooting in
Panorama Mode, when the LCD
shows "Improper alignment. Please
try again," it means that in the
process of the camera moving,
the angle is off the green line and
stitching cannot be completed. You
will have to try again, keeping the
LCD image aligned with the green
line.
In order to guarantee the best
shooting effect in Panorama Mode,
please keep moving horizontally
and keep unnecessary shaking to a
minimum.
In panorama mode, up to 4 photos
can be captured when the image
size is set at 2MP.
32

Scene Mode

You can select your desired scene from
the 12 Scene modes according to the type
of environment you are shooting in. The
camera then automatically configures the
most appropriate settings for the best
possible photos.
1. Turn the Mode dial to the Scene Mode,
then the LCD will display as below:
Night Portrait
2. Press the arrow buttons to select a
scene, and press the
confirm.
3. If you need to change the scene,
please press the
button, and finally the arrow buttons to
reselect a scene.
button to
button, the