Kodak PIXPRO AZ401 Bedienungsanleitung Seite 100

Message
Remove USB Cable!
Connection Failed!
Write Protect!
Card Full!
Memory Full!
Card Error!
Description
Indicates that you can
disconnect the USB cable.
Failure to connect to
your PC, printer, TV (with
HDMI).
The SD card is locked.
Indicates that the SD card
is full.
Indicates that the camera
memory is full.
During power-on, the SD
card cannot be recognized
or a read/write error
occurs has occurred.
Solution
This message disappears after you
disconnect the USB cable.
Remove USB cable and retry
connection.
Remove SD card and switch
the lever on the side of card
to UNLOCK. This message will
disappear after 2 seconds.
Replace SD card with another
that has available memory. This
message will disappear after 2
seconds.
Erase Files or replace memory card
in order to take more photos or
videos.
Format the SD card. WARNING:
Formatting the SD card will erase
all data on the card. Copy the
data from the SD card to another
storage, such as a computer.
Otherwise, all data will be erased
after the format. This message will
disappear after 2 seconds.
99 99