Richen EF456A Bedienungsanleitung Seite 41

EN
S E T U P C U R R E N T DAY A N D TI M E
Hold time but ton
Repeatedly press time but ton
play which represents Monday- Sunday. Press but ton
automatically enter hour set ting. Press but ton
but ton to save and then automatically enter minute set ting. Press but ton
again to set minute and then press to
S E T U P T H E 7 DAYS TI M E R
• Hold the button
firebox flashes to enter 7 days timer setting mode.
• D1 (Monday) will show on the display and then press
then 00 will show on the display. Press button
turning on the heater and then press
the display, press
press to confirm.
P L E A S E N OT E: T H E R E I S O N LY O N E P E R I O D E AC H DAY F O R H E AT I N G O N A N D O F F.
• Repeat the steps above to set the timer for D2 to D7 (Tuesday to Sunday).
The display on fire will show the time for turning on and off the
heater as same as the time of last day. If you want to change the time,
press the button
• If you don't want to set for a certain day, just set both start and end
time as 00.
• Hold 7 days timer button
for Sunday. The indicator will stop to flash.
• The weekly timer will be set only when you finish the setting from Monday
to Sunday completely. During the setting process, the pause of more
than 20 seconds will terminate the entire weekly timer setting.
O PE N W I N D OW D E T E C TI O N
Open window detection is an innovative eco feature that detects a rapid drop
in room temperature caused by an open window. The warning word "oP " will
be displayed on the appliance and the heater will be turned off. If the room
temperature rises or the remote control is operated manually, the heater will
return to its normal working state.
on the remote to enter date and time set ting mode;
to select date, D1- D7 will show on the dis -
on the remote until the 7 days timer indicator on the
to set the time for turning off the heater and then
to save all settings after you finish the setting
to confirm, and then
to set the hour, and press
save.
to confirm;
to set the time for
to confirm; The 00 will show on
41