Küppersbusch DDL9830.0W Bedienungsanleitung Mit Montageanweisungen Seite 32

PL: LIGHTS ON/OFF button
Light intensity: by long pressing the "PL" button with the light on, the light intensity begins to
decrease until it reaches the minimum value; releasing the button interrupts the lowering of the
light intensity. Once the minimum value is reached and by another long press of the "PL"
button, the light intensity starts increasing until it reaches the maximum value; if it is released,
it stops at the brightness reached.
Light color: With the cooker hood off and the lights off, press and hold the "PL" button until
the LED on the cooker hood lights up to enter the dynamic light menu. By pressing the "PL"
button once, you have the variation of the hue of the light from 2700°K to 4000°K in 10 steps.
Once the desired tone is reached, you must wait 10 seconds, the LED on the hood will stop
flashing and the function will be saved.
PC: FRESH AIR ON/OFF button
Fresh air activation/deactivation: long press of the "PC" button with hood removed.
This feature allows the motor to run at 1st speed for 10 minutes, followed by 50 minutes
of standby. This option remains active for a period of 24 hrs. To deactivate the fresh air
function, press the "PC" or "P0" button again. While: the function is active, both with the
engine running and in stand-by, the bonnet LED will flash every 5 seconds.
Clean Air Activation / Deactivation: Press the "PC" button (a "C" will appear on the
display). When this function is activated, the motor will run at maximum speed for about
6 minutes, at the end of the 6 minutes the motor will switch off automatically. To disable
this function, press the "PC" key or the "P0" key.
Note: This function can only be activated when the hood is switched on and overrides all
other active engine functions.
PT: TIMER button (a "T" appears on the display)
The timer performs a 15 minute countdown and can only be activated when the engine is
running. The 15 minute duration does not change even if the speeds are changed during the
countdown. At the end of the 15 minutes, the motor stops.
PD: Display.
Buzzer activation / deactivation: By default the hood is supplied with the buzzer active, if
you wish to deactivate it, with the hood off, turn on the light by pressing the "PL" button, then
press and hold the "PT" and buttons "P1" keys until the hood switches on without an acoustic
signal. If you want to reactivate, repeat the above process, the LED will light up and the beep
will sound to confirm.
Note: To save battery power, the display will remain active for about 4 seconds, after which it
will turn off, to show the active functions, select any key and the display will wake up again.
HOOD LED INDICATION
There is an LED in the hood body that indicates the operating status of the engine running at
speed according to the following criteria:
Motor OFF: LED off;
1st speed motor motor Blue LED color;
2nd speed motor Green LED color;
3rd Speed Motor Yellow LED Color;
4th speed motor Red LED color;
Motor of 5th speed motor (Intense) Magenta LED color (Blinks intermittently for 1 second for 6
32