Küppersbusch DDL9830.0W Bedienungsanleitung Mit Montageanweisungen Seite 26

- We recommend installation by trained specialists.
- Do not connect the device during installation the power grid.
- Disconnect the device from the power supply before using
carry out cleaning or maintenance work.
- The device must be installed by a accessible plug or main
switch from the mains.
- Steam cleaners must not be used.
- Do not use sharp ones to clean glass abrasives or sharp
metal scrapers, as these scratch the surface and break the
glass.
- CAUTION: Make sure the device is disconnected from the
mains power is disconnected (OFF) before turning on bulbs
replaced to avoid the possibility of electric shock.
- Only remove the protective film from the hood after the
complete assembly. This causes damage to the outside of the
device avoided, not covered by the warranty be covered.
WARNINGS REGARDING ELECTRICAL CONNECTION
- The electrical connection may only be carried out by a
qualified person be carried out by an electrician.
- Check before connecting the device to the mains
Make sure that the ones specified on the type plate of the
device Voltage, frequency and power values with the
house power supply and the socket are compatible.
26