NEO TOOLS 75-203 Gebrauchsanweisung Seite 18

HOW TO MEASURE VOLUME
Switch on the device and swipe left/right to choose the volume measurement
mode . Scroll up/down and choose measurement unit and the
measurement reference point.
The volume measurement mode is used to measure rectangular cuboid volumes.
Press the measurement button (2) to measure one of the cuboid edges. Make the
measurement of the other two cuboid edges in the same way. The result shown is
the rectangular cuboid volume.
AUTOMATIC HORIZONTAL DISTANCE MEASUREMENT
Switch on the device and swipe left/right to choose the horizontal distance
measurement mode
the measurement reference point.
Press the measurement button (2) and measure length of the upper side of the
triangle, indicated in red on the range finder screen. Based on the distance and
the angle measured by the range finder, it will automatically determine height
(vertical) and distance (horizontal). The screen will show the following values, up
to bottom: measured distance, height, distance.
. Scroll up/down and choose measurement unit and
18
neo-tools.com neo-tools.com