Firmware - Shure MV88plus Bedienungsanleitung

Issue
Audio is distorted.
Left/right stereo channels do
not match video.
Audio is not in sync with vi-
deo
Recording stops due to over-
heating
Unable to share file.
General troubleshooting.
Note: It may be useful to reset the app to restore functionality. Perform a hard reset by unplugging and re-plugging the micro-
phone.

Firmware

Bei Firmware handelt es sich um die in jede Komponente eingebettete Software, die die Funktionalität steuert. Zwecks Inte-
grierung zusätzlicher Funktionen und Verbesserungen werden regelmäßig neue Firmware-Versionen entwickelt. Um diese De-
signverbesserungen zu nutzen, neue Firmware-Versionen auf Aufforderung herunterladen.
Tipp: Um beste Ergebnisse zu erzielen, bevor der digitale Signalprozessor aktualisiert wird, sich vergewissern, dass das Mi-
krofon an das Mobilgerät angeschlossen ist und dass die Batterie des Geräts vollständig geladen ist. Erst die Verbindung tren-
nen, wenn die Aktualisierung abgeschlossen ist.
Solution
Use the audio meter to ensure that volume peaks are within the target range (the gray
area). If the level reaches the red peak indicator of the input meter, turn the gain down.
Depending on the orientation of the recording device, it may be necessary to engage the
Left-Right swap in MOTIV settings. If the audio has already been recorded, you can
switch the left and right channels in most audio editing software.
Switch to a lower frame rate or resolution size. You might achieve better performance with
a less system intensive frame rate.
MOTIV Video app responds to device overheating by disabling the meter and waveform
display. If device continues to overheat, MOTIV will save your recording and shut down
the app. Ensure that your device has cooled down before starting a new recording.
If a file is too large to be shared, there are a couple options for reducing file size.
Convert your file to a compressed file format.
Connect your mobile device to your computer and use file transfer, like iTunes, to down-
load the file to your desktop.
Split your track in two, export both files and recombine them using audio editing software.
Ensure that your app is updated to the most current version.
Make sure that your phone's operating system is updated to the most current version.
Check to see how the microphone works using a different connection cable or different
device.
Close and restart the application.
Powering down and rebooting the device will clear the cache and can sometimes help
with software performance.
Shure Incorporated
34/39