IN & OUT HOUSE EF447A Bedienungsanleitung Seite 27

E N
S E T U P T H E 7 DAYS TI M E R
• Hold the button
firebox flashes to enter 7 days timer setting mode.
• D1 (Monday) will show on the display and then press
then 00 will show on the display. Press button
turning on the heater and then press
the display, press
press to confirm. PLEASE NOTE: There is only one period each day
for heating on and off.
• Repeat the steps above to set the timer for D2 to D7 (Tuesday to Sunday).
The display on fire will show the time for turning on and off the
heater as same as the time of last day. If you want to change the time,
press the button
• If you don't want to set for a certain day, just set both start and end
time as 00.
• Hold 7 days timer button
for Sunday. The indicator will stop to flash.
• The weekly timer will be set only when you finish the setting from Monday
to Sunday completely. During the setting process, the pause of more
than 20 seconds will terminate the entire weekly timer setting.
O PE N W I N D OW D E T E C TI O N
If the sensor detects a rapid drop in room temperature, this is interpreted as
an open window. A warning symbol (OPn) is displayed and the heater is au -
tomatically switched off. Af ter the indoor temperature has risen or a manual
override of the warning has been made (by operating control panel or remote
control or heat but ton on APP), the unit returns to normal operation.
C U S TO M I S E D S TA R T-U P C O N T RO L
Depending on the room temperature and the target temperature, the heater
switches on automatically to heat the room to the set temperature at the set
time. For example, if your timer is set to 6:00 p.m. and the temperature is set
to 23 °C, the heater will switch on at 5:30 p.m. to ensure that the room is 23 °C
at 6:00 p.m.
on the remote until the 7 days timer indicator on the
to set the time for turning off the heater and then
to save all settings after you finish the setting
to confirm;
to set the time for
to confirm; The 00 will show on
27