IN & OUT HOUSE EF447A Bedienungsanleitung Seite 26

E N
B U T TO N T I T L E
STAND BY
FLAME
TIMER
HEATER
TEMPERATUR
TIME
7 DAYS TIMER
S E T U P C U R R E N T DAY A N D TI M E
Hold time but ton
Repeatedly press time but ton
play which represents Monday- Sunday. Press but ton
automatically enter hour set ting. Press but ton
but ton to save and then automatically enter minute set ting. Press but ton
again to set minute and then press to
26
F U N C T I O N
Press to turn on /off the
flame effects and heater.
Repeatedly press to cycle
through 3 flame effects.
Repeatedly press to cycle
through timer options.
Select an amount of time for
the appliance to operate, and
then automatically turn off.
Choose between 0.5, 1, 2, 3,
4, 5, 6, 7, 8, 9 hours.
Press to turn on/off the
heater.
The heater can be run
independently.
Press to select the tempe-
rature you want the room
to reach from the range of
16-28°C (60- 82°C)and then
58°C (99°C), which will keep
the heater on. Hold the
button to switch the unit
between °C/°F.
Press to set up the heating
start and end time.
Press to turn on or off the 7
days timer for heater.
on the remote to enter date and time set ting mode;
to select date, D1- D7 will show on the dis -
F I R E P L AC E R E S P O N S E
The flame runs. The current
flame setting L1, L2, L3 shows
on the display.
The flame runs. The current
flame setting L1, L2, L3 shows
on the display.
The number 30, 1H, 2H, 3H, 4H,
5H, 6H, 7H, 8H, 9H, 0H shows
on the display.
The temperature shows on the
display and the heater indicator
will turn off after 10 seconds if
the flame effect is on.
The display of the appliance
shows the temperature
16-28 in Celsius degree corre-
sponds to 60-82 in Fahrenheit
degree. There will be changes
in number while switching
between °C/°F.
The number shows on the
display.
7 days timer and heater indi-
cators are both on.
to confirm, and then
to set the hour, and press
save.