Supported Audio Formats; Software Update - Samsung MX-ST90B Bedienungsanleitung

Supported Audio Formats

File Extension
*.mp3
*.wma
*.aac
*.wav
*flac
NOTES
• This product does not support WMA Professional codec.
• The above table shows supported sampling rates and bit rates. Files in formats that are not
supported will not play.
• AAC files only support the ADTS native format.

Software Update

Samsung may offer updates for the Sound Tower's system firmware in the future.
If an update is offered, you can update the firmware by connecting a USB device with the firmware
update stored on it to the USB2 port on your Sound Tower. For more information about how to
download update files, go to the Samsung Electronics website at www.samsung.com/us/support/.
Then, enter or select the model number of your Sound Tower, select the Software & Apps option, and
then Downloads. Note that the option names can vary.
NOTE
• If the upgrade takes more than 10 minutes, it means the upgrade process is stuck, Please unplug
the power cord Wait until the sound tower is powered off and plug it back in again. Next, make sure
the USB device is in the USB2 port. Then, wait 1 minute, and the sound tower will automatically
restart, and then wait until the upgrade is complete.
Audio Codec
MPEG 1 Layer3
MPEG 2 Layer3
MPEG 2.5 Layer3
WMA7/8/9
AAC
AAC-LC
HE-AAC
PCM/LPCM/
IMA_ADPCM
-
ENG - 23
Sampling Rate
32 kHz ~ 48 kHz
16 kHz ~ 24 kHz
8 kHz ~ 12 kHz
8 kHz ~ 48 kHz
8 kHz ~ 96 kHz
8 kHz ~ 96 kHz
8 kHz ~ 96 kHz
8 kHz ~ 192 kHz
8 kHz ~ 192 kHz
Bit Rate
32 kbps ~ 320 kbps
8 kbps ~ 160 kbps
8 kbps ~ 160 kbps
32 kbps ~ 320 kbps
< 1728 kbps
< 1728 kbps
< 1728 kbps
< 5 Mbps
< 5 Mbps