General Use Of Keys; Reading The Display; Routine Operations; Mounting A Disc - struers RotoPol-21 Gebrauchsanweisung

General Use of Keys

Acoustic Signals

Reading the Display

Routine Operations

Mounting a Disc

Starting the Disc

Stopping the Disc

16
RotoPol-21/-22/-25
Instruction Manual
w
WATER ON , WATER OFF
selected freely at User Select.
m
MENU , SELECT
when the machine has been stopped.
L
SELECT can only be activated when MENU
When pressing a key, a short beep indicates that the command
has been accepted, whereas a long beep indicates that the key
cannot be activated at the moment.
WATER ON 300RPM
GRINDING
Place the disc on the turntable and turn it until the three
driving pins engage with the holes in the turntable.
s
Press START . The disc starts rotating. Selected functions
are executed, and connected RotoSystem modules start
operating.
o
Press STOP . The disc stops rotating. Selected functions and
connected RotoSystem modules stop.
W
and SPEED
L A
and DISC can only be activated
- The first line on the screen shows the
setting of parameters WATER and
SPEED.
- The second line, if any, shows a
selected preset mode (GRINDING or
POLISHING).
d
can only be
m
is selected.