Herunterladen Inhalt Inhalt Diese Seite drucken

Massoth 8131001 Bedienungsanleitung Seite 13

Dimax funkempfänger 2.4ghz
Vorschau ausblenden Andere Handbücher für 8131001:
Inhaltsverzeichnis

Werbung

6.
Technische Daten
• Versorgungsspannung
5...24 V DC
(je nach Zentrale oder Regler)
• Stromaufnahme
30 mA im Ruhezustand
• Frequenzband
2,402...2,480GHz
• Sendeleistung
max. 10mW typ 1mW 0-9,5dBm
• Temperaturbereich
-20 ... +45°
• Abmessungen (L x B x H)
68 x 78 x 20 mm
• Regulatorische Information
Dieses Produkt enthält:
FCC ID: WAP4110
IC: 7922A-4110
(siehe Rückseite der Dokumentati-
on für regulatorische Information)
7.
Der Betrieb ist an folgenden
Geräten zulässig:
• DiMAX 1200Z, 1210Z, 800Z
• LGB® MZS III Zentrale 55006
• LGB® Fahrregler 51070, 51079
• PIKO® Zentrale 35010
• PIKO® Fahrregler 35002
Hinweis zur Temperatur: Benutzen
sie die Elektronik bei Tempera-
turen unter 0°C nur, wenn diese
vorher aus einem beheizten Raum
kommt. Die Wärme während des
6.
Technical Specifications
• Power Supply
5...24V DC (depending on Central
Station or controller)
• Current consumption
30mA in idle mode
• Frequency band
2,402...2,480GHz
• Transmitting power
max. 10mW typ 1mW 0...9.5dBm
• Temperature range
-20 ... +45°
• Dimensions
68 x 78 x 20 mm
• Regulatory Information
This device contains:
FCC ID: WAP4110
IC: 7922A-4110
(Please see backside of documen-
tation for Regulatory Information)
7.
Operating with the following
components is allowed:
• DiMAX 1200Z, 1210Z, 800Z
• LGB® MZS III Zentrale 55006
• LGB® Fahrregler 51070, 51079
• PIKO® Zentrale 35010
• PIKO® Fahrregler 35002
Note on temperature: Do only use
the electronics in under 0°C tem-
peratures if the hardware comes
out of a heated room. The heat
that is produced during operation
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis