Optional Accessories - i-PRO WV-X86531-Z2 Installationshandbuch

Specifications
Power source * :
1
Power consumption *
Operating environment
Ambient operating temperature:
Ambient operating humidity:
Storage environment
Storage temperature:
Storage humidity:
Waterproof * :
2
Shock resistance:
Wind resistance:
Dimensions:
Mass:
Finish:
Others:
*1 Refer to our technical information website <Control No.: C0106> for further information about Power
source and Power consumption information.
*2 Only when installation work is properly performed according to the Installation Guide and appropriate
waterproof treatment is performed.
*3 Component that has a structure on which the screws that are accessible after installation cannot be
screwed or unscrewed using an ordinary screwdriver.

Optional accessories

The latest information → Technical information website "Accessory Selector"
<Control No.: C0501>
Troubleshooting
Before requesting service, refer to "Troubleshooting" of Web Guide. Then, confirm the trouble.
PoE++ (IEEE802.3bt compliant)
: PoE ++ DC54V: 660 mA / approx. 35.6W (Class 5 device)
1
–40 °C to +55 °C *2 {–40 °F to +131 °F}
(Power On range: –20 °C to +55 °C {–4 °F to +131 °F})
0 % to 100 % (no condensation)
–30 °C to +60 °C {–22 °F to +140 °F}
10 % to 95 % (no condensation)
IP67/ IP66 (IEC 60529), Type 4X (UL50E), NEMA 4X compliant
IK10 (IEC 62262)
Up to 40 m/s {approx. 89 mph}
Maximum diameter: ø250 mm × 195 mm (H) {ø9-27/32 inches ×
Dome radius:
Approx. 3.8 kg {8.39 lbs}
Main body:
Outer fixing screws: Stainless steel (Corrosion-resistant
Dome cover:
Tamper-resistant enclosure*
NEMA TS2 Compliant
Maximum temperature according to NEMA TS 2 (2.2.7): 74 °C (165 °F)
7-11/16 inches (H)}
63.5 mm {2-1/2 inches}
Aluminum die cast, i-PRO white/brack
treatment)
PC resin, Clear
3
5