Inklang AYERS Four wireless Bedienungsanleitung Seite 19

englisch - EN 2
TABLE OF CONTENTS
OPERATING ENVIRONMENT
Our products are designed for conditions in living spaces. They may only be installed and operated at a temperature between 0° C and 40° C and a relative room humidity of up to 60%.
In case of direct sunlight and/or heat sources such as fireplaces, these temperatures may be exceeded!
ATTENTION
- SHOCK HAZARD - DO NOT OPEN
DO NOT REMOVE THE BACK OF THE DEVICE, THERE IS A RISK OF ELECTRIC SHOCK. THE
UNIT MUST NOT BE SERVICED BY THE USER. CONTACT US IF REPAIRS ARE NECESSARY.
WE ARE AT YOUR SERVICE.
The lightning symbol alerts the user to the presence of uninsulated dangerous voltage
within the product's enclosure. Such voltages are high enough to constitute a risk of
electric shock to humans.
GENERAL COMMISSIONING BURN IN
1 GENERAL
1.1 Scope of delivery
1.2 Unpacking
1.3 DDFA power amplifiers in overview
1.4 Setup
1.5 Assembly of feet and spikes
2 COMMISSIONING
2.1 Establish power supply
2.2 Operating mode: Wireless
2.3 Operating mode: Coax Digital wired
2.4 Operating mode: Optical Digital wired
2.5 Operating mode: Analog wired
2.6 Room EQs
3 BURN IN
4 MAINTENANCE
5 APPENDIX
5.1 CE Declaration of Conformity
5.2 Information according to § 18 ElektroG
6 WARRANTY
MAINTENANCE APPENDIX WARRANTY
3
3
4
6
7
9
9
10
11
12
13
14
14
14
14
14
15