Hohem iSteady Pro E Bedienungsanleitung Seite 12

App "Hohem Gimbal" Instruction
Other App Functions
1. Gimbal Specs Setting:
A. Following Speed (To adjust the following speed of pan/tilt/roll axis)
B. Joystick Speed (To adjust the rotating speed by control the joystick)
C. Following Dead Area (No following movement when the rotate angle is less than dead area setting)
D. Trim (Adjust the tilt/roll axis in small angle)
E. Joystick Reverse (Reverse the rotation direction by control the joystick)
F. Motor Options ( To adjust the motor torison of pan/tilt/roll axes, which is useful to solve the vibrate
issue due to lightweight or over weight actioncam)
G. Camera options: enable/disable charging output of gimbal mini USB por t,
CAMERA CONTROL OPTIONS.
2. Firmware Upgrade: The f irmware is subject to upgrade without a f ixed schedule. Firmware upgrade
is help to optimize the working of gimbal, please refer to page 13 for details.
3. Calibration: It requires to calibrate the gimbal only when you notice any kind of not level or drift
on any of the axes, please refer to page 12 for details.
4. Operation Tutorial: For any questions, please refer to the user guide for details, the content is subject
to change without prior notice.
11