Klarstein ABBEY Bedienungsanleitung Seite 19

5. If you press the temperature icon on the screen after starting operation,
the current temperature and time settings are displayed on the screen. The
time is not increased or decreased. When the device has heated up to the
set temperature, there are two reminder tones. The heating element stops
operating and the countdown of the set time begins. When the temperature
of the liquid drops by 2 °C, the device heats up again with the set time. The
heat status will be displayed on the screen.
6. If you turn the rotary control in operating status (no sound), the screen lights
up. However, the temperature and time are neither increased nor decreased.
If no button is pressed and the rotary control is not turned, the screen goes
dark after 10 seconds. During operation, the temperature and time cannot be
adjusted unless the programme is paused manually.
7. During the heating process, press the temperature symbol (the screen
lights up) and switch to the operating status (the screen displays the set
temperature and time, e.g. if the set temperature is 75 °C, the screen first
displays "75 °C", the same applies to the time). The temperature and time can
be increased and decreased.
8. If no time setting is made, the screen remains permanently lit. Once the time
has elapsed, the unit beeps 15 times (once per second) and then returns to
the operating status. The screen lights up. If no buttons are pressed or the
rotary control is not turned within 10 seconds, the screen goes blank.
EN
19