Precautions And Servicing - Valsir BE32 18 V Bedienungsanleitung

PRECAUTIONS AND SERVICING

1. To clean the tool, use a cloth slightly soaked with a common non-aggressive detergent.
DO NOT USE acid substances, solvents, thinners or powdered products which can
damage the components.
2. For a good performance of the Coupling machines BE32 18 V, the machine must be
serviced at Valsir after 2 years of operation.
3. Besides the operations listed at 1 and 2, any other servicing works on the Coupling
machine BE32 18 V must be carried out in the mechanical dept. of Valsir. Any unduly use
of the tool and the components makes guarantee right void.
4. In case of great leakage of oil from the machine, immediately send the Coupling machine
BE32 18 V to Valsir, for checking and potential repairing.
WARNING: Warning: avoid that leaked oil comes into contact with the eyes or skin.
Do not inhale or ingest. Do not disperse into the environment.
5. Avoid that the machine gets wet: water and liquids in general can damage the electrical
circuits.
WARNING: During maintenance operations, make sure that the equipment is
disconnected from power sources (battery or outlet).
6. Regularly lubricate the link device of the extractor with oil (see picture 3).
24
Lubrificate
Frontal view Section
Picture 3