Use Of The Support - Valsir BE32 18 V Bedienungsanleitung

5. Push the start button (B), till the coupling is done (the pipe will automatically get clear from
the tool, once work is finished). The Coupling machine BE32 18 V will automatically return
to the original position.
WARNING: the time necessary to the automatic reset is 10 seconds.
WARNING: the single-use expander (F) cannot be used for successive processing.
6. Clutch the safety fitting into the coupling of pipe, till the stop, after spreading the lubricant
VS0105210.
7. Screw the cap till the safety anti-unscrewing notch (use the suitable wrench, series
VS0162301 - VS0162303 - VS0162305).
WARNING: if necessary the fitting can be removed by blocking the cap with a
suitable spanner.

USE OF THE SUPPORT

The Coupling machine BE32 18 V is provided with a multi-purpose support, which can be
used as a supporting tool when working on a counter.
Place the Coupling machine BE32 18 V into
the space in the middle of the pedestal (see
picture 2).
The catch at the back keeps the tool balanced
and prevents it from falling; it also allows jobs
to be carried out easily without any other
support.
Picture 2
23